Home / Rubber Lagging Sheet
Conveyor-X® wide range of SUPERGRIP sheets, made out of high-quality natural rubber & synthetic rubber, are produced in different thicknesses, rubber qualities, and patterns to ensure the selection of the most appropriate type to suit all application requirements. The SUPERGRIP range is supplied with a special CN bonding layer since it provides a higher bond strength between the rubber and the metal surface due to its uniform formulation.
We developed several wear rubber compound which have proven to excel in the field. Our expertise in compounding and processing technology have resulted in customer specific solutions.
• Easy to install
• Minimum wastage and economically priced
• Reduced adhesive use due to Bonding Layer
• Maintains friction grip under unfavourable drive conditions
• Prevents dirt build up in pulleys
• Extremely helpful while running in wet conditions
• Increased friction coefficient between the pulley and conveyor belt
• Reduces slippage between belt and pulley
• Improves and stabilizes coefficient of friction
• Positive influence on belt tracking
• Evacuation of moisture and dirt
• Protects the pulley against wear and corrosion
• Prevents material build-up
• Deep grooving to handle large amounts of dirt and provide long operating life
• Special chemical bonding layer (CN) which provides a higher bond strength between the rubber and metal surface due to its uniform formulation
• Grooved rubber lagging for drive pulleys
• Long belt conveyors
• Large pulley diameters
• For high-tension fabric and steel cord belts of all strengths
Polymer basis | NR/SBR |
Hardness | 65 ± 5 Shore A |
Tensile Strength | 20 Mpa |
Density | 1.13 ± 0.03 |
Abrasion (mm3) | 120 |
Elongation at Break | 450% min |
Description | Thickness | Width | Roll Length |
---|---|---|---|
SUPERGRIP 70/CN | 10mm | 1500mm | 10mtr |
SUPERGRIP 70/CN | 10mm | 2000mm | 10mtr |
SUPERGRIP 70/CN | 12mm | 1500mm | 10mtr |
SUPERGRIP 70/CN | 12mm | 2000mm | 10mtr |
SUPERGRIP 70/CN | 16mm | 1500mm | 10mtr |
SUPERGRIP 70/CN | 16mm | 2000mm | 10mtr |
Profile | Diamond Profile |
---|---|
B - Diagonal length (mm) | 86 |
L - Diagonal length (mm) | 50 |
S - Gap between the profiles (mm) | 8 |
D - Depth of Profile (mm) | 6 |
T - Minimum Thickness (mm) | 12 |
Product Width (mm) | 1500/2000 |
Finish on the Bonding side | With Bonding Layer (Adhesive/Tie Gum Layer) |
Without Bonding Layer - Smooth or with Grinding | |
Standard Roll Length (m) | 10* |