ConveyorX

Cutting Electrode

Home / Cutting Electrode

Cutting Electrode

Premium Multipurpose Electrode for Gauging, Chamfering, Cutting, & Piercing.

Special Features

* Blasting Arc Yielding High Speed And Clean Cutting And Gauging.

* No Compressed Air Or Oxygen Required.

* Excellent All Position Welding And Restrike Capability.

* Designed To Operate On All Types Of Welding Machines With Limited Capacity.

Typical Properties

Tensile Strength

Yield Strength

Elongation

100000 PSI

55000 PSI 

40%

Applications

Ideal For Gouging, Cutting And Chamfering Of Unalloyed And Low Alloyed Steels, Cr-Ni, Cr-Ni-Mo And Other Alloyed Stainless Steels, Diffrent Grades Of Cast Irons, Cast Steels, Aluminums And Copper For Which The Oxy-Fuel Cutting Methods Are Not Applicable.

International Specification

Propreitory Product

Recommended Amperage Settings

Diameter (mm)

Minimum Amperage

Maximum Amperage

1/8 (3.15)

140

230

5/32 (4.0)

200

310

3/16 (5.0)

280

430

Welding Techniques

Initiate Arc By Holding Electrode At A Low Angle To The Workpiece (10° to 15°). Push The Electrode As Fast As The Metal Is removed. Maintain Shorter Arc For Faster And Cleaner Cut. For Piercing Hold Electrode Vertically And Push In And Out. For Cutting action, Use the sawing action technique.

error: Content is protected !!
Call Now Button